Undergraduate Programmes

Further Education and Training Awards Council (FETAC )

Dublin Institute of Technology welcomes applications from students who are presenting FETAC Level 5 awards and there are around 450 first year places available on Higher Certificate Programmes, Ordinary Degree Programmes and Honours Degree Programmes for such applicants.

These places are in addition to the normal quota of places available to other applicants.

Allocation of these places will be based on the following criteria:

Applicants must apply through the CAO system.
Application can be made online at http://www.cao.ie or click here! Make sure you select the "FETAC" category.
Applicants must have obtained a full FETAC award. A Component Certificate is not sufficient.
A major award maybe accumulated over more than one academic year. In such cases it is the responsibility of the applicant to apply to FETAC for a major award where courses are taken over more than one year.
The best 8 modules are used for ranking purposes for a reserved quota of places on a number of courses.
Applicants presenting full FETAC Level 5 awards will not be required to meet minimum entry requirements based on Leaving Certificate results. The FETAC award is accepted in its own right.
Points will be awarded for the best eight modules passed in the particular FETAC course. The points awarded per module will be as follows

Distinction:	3 points	per module
Merit:	2 points	per module
Pass:	1 point	per module

Most modules have a credit value of one. Where a module has a credit value greater or less than one, then this will be included in the points calculation. For example if a particular module has a credit value of two then a distinction would give a points level of six (3x2).
Some programmes require specific awards. It is important to know which awards are accepted for entry to these programmes.
Offers of places to successful applicants will be issued in CAO round zero offers in August each year.
Unfilled places will be offered to successful applicants in subsequent rounds of CAO offers.
In the case of Honours Degree programmes applicants must normally achieve a minimum of five distinctions (check our list below for exceptions) in a full award to be eligible. In addition applicants will be required in most cases to have specific FETAC awards and some designated modules.
In the case of Higher Certificate and Ordinary Degree applicants are simply required in most cases to present a specific FETAC award.
Students who obtain one of these places on an Ordinary Degree programme and who achieve the appropriate result in their final DIT examinations may compete for progression to third year of a related Honours Degree programme.
Students who obtain one of these places on a Higher Certificate programme and who achieve the appropriate result in their final DIT examinations may compete for progression to third year of a related Ordinary Degree programme and then to third year of a related Honours Degree programme

FETAC (Level 5) Access Entry Route

DIT recognises the role of higher education in providing benefits to individuals & communities and is committed to ensuring that people and communities experiencing educational disadvantage are supported in accessing higher education.

To find out more about Access CLICK HERE
Information on FETAC Access Entry routes (eligibility, how to apply, closing date, etc) CLICK HERE

Honours Degree Programmes

DIT PROGRAMME	FETAC AWARD REQUIRED	DISTINCTION(S) REQUIRED
DT001 Product Design Places available: 4	ONE OF THE FOLLOWING AWARDS: ADESX - Design AGDXX - Graphic Design ACADX - Computer Aided Design AFURX - Furniture Design AIDXX - Interior Design CCONT - Construction Technology CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CMTXX - Motor Technology 5M2162 - Life Sciences Manufacturing Operations	FIVE DISTINCTIONS
DT028 Transport Operations & Technology Places available: 5	CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CMTXX - Motor Technology	FIVE DISTINCTIONS
DT101 Architecture Places available: 3	ONE OF THE FOLLOWING AWARDS: ADESX - Design AGDXX - Graphic Design ACADX - Computer Aided Design AFURX - Furniture Design AIDXX - Interior Design CCONT - Construction Technology	FIVE DISTINCTIONS and SUITABILITY TEST and INTERVIEW for minimum entry.
DT106 Planning & Environmental Management Places Available: 8	ONE OF THE FOLLOWING AWARDS: ADESX - Design BIPXX - Information Processing CASHX - Horticulture CASLT - Applied Science - Laboratory Techniques CCONT - Construction Technology DOREC - Outdoor Recreation ECHSX - Cultural & Heritage Studies	FIVE DISTINCTIONS WHICH MUST INCLUDE FOUR OF THE FOLLOWING: A20012 Computer Aided Draughting (2D) A20017 Drawing A20189 Combined Materials A20191 Architectural Drawing A20209 Design B20012 Database Methods B20028 Spreadsheet Methods B20029 Statistics B20145 Information & Communication Systems C20006 Biology C20008 Building Construction C20011 Wood Fabrication C20033 Laboratory Techniques C20037 Materials Science C20049 Plant Science C20055 Soil Science & Growing Media C20139 Mathematics C20174 Mathematics for Engineering C20190 Plant Identification & Use D20031 Hill Walking Proficiency D20130 Heritage D20156 Outdoor Recreation D20157 Outdoor Leadership & Safety D20158 Adventure Activities E20113 Local History Studies E20114 Folklore E20115 Archaeology
DT110 Property Economics (Valuation Surveying) Places Available: 8	ONE OF THE FOLLOWING AWARDS: BBSAX - Business Studies Administration BBSXX - Business Studies	FIVE DISTINCTIONS
DT111 Construction Economics & Management Places Available: 8	CCONT - Construction Technology	FIVE DISTINCTIONS
DT112 Geomatics (Surveying & Mapping) Places Available: 8	ONE OF THE FOLLOWING AWARDS: BIPXX - Information Processing CASLT - Applied Science - Laboratory Techniques CCONT - Construction Technology	FIVE DISTINCTIONS WHICH MUST INCLUDE FOUR OF THE FOLLOWING: A20012 Computer Aided Draughting (2D) B20012 Database Methods B20028 Spreadsheet Methods B20029 Statistics B20145 Information and Communication Systems C20008 Building Construction C20011 Wood Fabrication C20033 Laboratory Techniques C20037 Materials Science C20139 Mathematics C20048 Physics C20174 Mathematics for Engineering
DT117 Construction Management Places Available: 8	CCONT - Construction Technology	FIVE DISTINCTIONS
DT175 Architectural Technology Places available: 3	ONE OF THE FOLLOWING AWARDS: ADESX - Design AGDXX - Graphic Design ACADX - Computer Aided Design AFURX - Furniture Design AIDXX - Interior Design CCONT - Construction Technology	FIVE DESTINCTIONS
DT203 Forensic & Environmental Analysis Places Available: 3	CASLT - Applied Science - Laboratory Techniques	FIVE DISTINCTIONS WHICH MUST INCLUDE: C20011 Chemistry, OR C20022 Food Chemistry AND, ONE OF THE FOLLOWING: C20006 Biology C20033 Laboratory Techniques C20048 Physics PLUS PASS in C20139 Mathematics
DT205 Mathematical Sciences Places Available: 4	ONE OF THE FOLLOWING AWARDS: CASLT - Applied Science - Laboratory Techniques CCONT - Construction Technology CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CCNMX - Computer Network & Maintenance	FIVE DISTINCTIONS WHICH MUST INCLUDE C20139 Mathematics, OR C20174 Mathematics for Engineering, OR C20175 Mathematics for Computing
DT211 Computing Places Available: 8	CITXX - Information Technology	FIVE DISTINCTIONS WHICH MUST INCLUDE C20012 Computer Architecture, AND C20013 Computer Programming
DT220 Industrial Mathematics Places available: 4	ONE OF THE FOLLOWING AWARDS: CASLT - Applied Science - Laboratory Techniques CONT - Construction Technology CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CCNMX - Computer Network & Maintenance	FIVE DISTINCTIONS WHICH MUST INCLUDE C20139 Mathematics, OR C20174 Mathematics for Engineering, OR C20175 Mathematics for Computing
DT222 Physics Technology Places Available: 5	CASLT - Applied Science - Laboratory Techniques	FIVE DISTINCTIONS WHICH MUST INCLUDE C20139 Mathematics, OR Leaving Certificate Mathematics OB3
DT227 Science with Nanotechnology Places Available: 5	CASLT - Applied Science - Laboratory Techniques	FIVE DISTINCTIONS WHICH MUST INCLUDE C20139 Mathematics, OR Leaving Certificate Mathematics OB3
DT228 Computer Science Places Available: 10	CITXX - Information Technology	FIVE DISTINCTIONS WHICH MUST INCLUDE C20012 Computer Architecture AND C20013 Computer Programming
DT229 Clinical Measurement Places Available: 2	CASLT - Applied Science - Laboratory Techniques	FIVE DISTINCTIONS WHICH MUST INCLUDE C20139 Mathematics, OR Leaving Certificate Mathematics OB3
DT235 Physics with Medical Physics & Bioengineering Places Available: 3	CASLT - Applied Science - Laboratory Techniques	FIVE DISTINCTIONS WHICH MUST INCLUDE C20139 Mathematics, OR Leaving Certificate Mathematics OB3
DT321 Business & Law Places available: 3	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS WHICH MUST INCLUDE: B20029 Statistics, OR C20139 Mathematics, OR Leaving Certificate Mathematics OC3 AND B20001 Accounting - Manual & Computerised B20151 Applied Economics
DT341 Marketing Places Available: 4	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS WHICH MUST INCLUDE: B20029 Statistics, OR C20139 Mathematics, OR Leaving Certificate Mathematics OC3 AND B20001 Accounting - Manual & Computerised B20151 Applied Economics
DT343 Retail & Services Management Places Available: 4	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS WHICH MUST INCLUDE: B20029 Statistics, OR C20139 Mathematics, OR Leaving Certificate Mathematics OC3 AND B20001 Accounting - Manual & Computerised B20151 Applied Economics
DT354 Business Computing Places Available: 2	CITXX - Information Technology	FIVE DISTINCTIONS WHICH MUST INCLUDE: B20012 Database Methods C20013 Computer Programming C20175 Mathematics for Computing
DT358 Logistics & Supply Chain Management Places Available: 4	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS WHICH MUST INCLUDE: B20029 Statistics, OR C20139 Mathematics, OR Leaving Certificate Mathematics OD3 AND B20001 Accounting - Manual & Computerised B20151 Applied Economics
DT365 Business & Management Places Available: 7	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS WHICH MUST INCLUDE: B20029 Statistics, OR C20139 Mathematics, OR Leaving Certificate Mathematics OC3 AND B20001 Accounting - Manual & Computerised, AND B20151 Applied Economics
DT366 Accounting & Finance Places available: 3	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS WHICH MUST INCLUDE: B20029 Statistics, OR C20139 Mathematics, OR Leaving Certificate Mathematics OC3 AND B20001 Accounting - Manual & Computerised, AND B20151 Applied Economics
DT398 Human Resource Management Places available: 4	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS WHICH MUST INCLUDE: B20029 Statistics, OR C20139 Mathematics, OR Leaving Certificate Mathematics OC3 AND B20001 Accounting - Manual & Computerised, AND B20151 Applied Economics
DT399 Economics & Finance Places available: 3	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS WHICH MUST INCLUDE: B20029 Statistics, OR C20139 Mathematics, OR Leaving Certificate Mathematics OC3 AND B20001 Accounting - Manual & Computerised, AND B20151 Applied Economics
DT401 International Hospitality Management Places Available: 8	ONE OF THE FOLLOWING AWARDS: BBSXX - Business - Studies BMXXX - Marketing DHCXX - Hotel & Catering DTXXX - Tourism	FOUR DISTINCTIONS
DT407 Culinary Arts Places Available: 5	Any Award	FIVE DISTINCTIONS
DT412 Tourism Marketing Places Available: 8	ONE OF THE FOLLOWING AWARDS: BBSXX - Business - Studies BMXXX - Marketing DHCXX - Hotel & Catering DTXXX - Tourism	FOUR DISTINCTIONS
DT413 Event Management Places Available: 5	ONE OF THE FOLLOWING AWARDS: BBSXX - Business - Studies BMXXX - Marketing DHCXX - Hotel & Catering DTXXX - Tourism	FOUR DISTINCTIONS
DT416 Culinary Entrepreneurship Places Available: 5	ONE OF THE FOLLOWING AWARDS: BBSXX - Business Studies BBSAX - Administration BBSIT - International Trade BBSSX - Business & Secretarial Studies BEBXX - Business Studies BIPXX - Information Processing BMXXX - Marketing BRSXX - Retail Studies CASFX - Food Science CCNMX - Computer & Network Maintenance CITXX - Information Technology DHCXX - Hotel and Catering DTXXX - Tourism ECDXX - Community Development ELAXX - Liberal Arts (Pilot Certificate Title) EMMPX - Multimedia Production EYXXX - Youth Work	FIVE DISTINCTIONS WHICH MUST INCLUDE: G20001 - Communications, AND W20008 - Work Experience
DT417 Bar Studies (Management & Entrepreneurship) Places Available: 8	ONE OF THE FOLLOWING AWARDS: BBSXX - Business Studies BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BEBXX - e Business BMXXX - Marketing BRSXX - Retail Studies DHCXX - Hotel and Catering DSRXX - Sport and Recreation DTXXX - Tourism	FIVE DISTINCTIONS
DT420 Nutraceuticals in Health & Nutrition Places Available: 5	CASFX - Food Science CASLT - Laboratory Techniques	FIVE DISTINCTIONS FROM THE FOLLOWING: C20006 - Biology C20011 - Chemistry D20022 - Food Chemistry C20139 - Mathematics C20041 - Microbiology C20024 - Food Processing C20140 - Nutrition C20048 - Physics B20029 - Statistics D20127 - Food Preservation & Processing D20001 - Anatomy and Physiology C20033 - Laboratory Techniques C20049 - Plant Science D20165 - Safety & Health at Work
DT421 Food Innovation Places available: 5	CASFX - Food Science CASLT - Laboratory Techniques	FIVE DISTINCTIONS FROM THE FOLLOWING: C20006 - Biology C20011 - Chemistry D20022 - Food Chemistry C20139 - Mathematics C20041 - Microbiology C20024 - Food Processing C20140 - Nutrition C20048 - Physics B20029 - Statistics D20127 - Food Preservation & Processing D20001 - Anatomy and Physiology C20033 - Laboratory Techniques C20049 - Plant Science D20165 - Safety and Health at Work
DT422 Pharmaceutical Healthcare Places available: 5	CASFX - Food Science CASLT - Laboratory Techniques	FIVE DISTINCTIONS FROM THE FOLLOWING: C20006 - Biology C20011 - Chemistry D20022 - Food Chemistry C20139 - Mathematics C20041 - Microbiology C20024 - Food Processing C20140 - Nutrition C20048 - Physics B20029 - Statistics D20127 - Food Preservation & Processing D20001 - Anatomy and Physiology C20033 - Laboratory Techniques C20049 - Plant Science D20165 - Safety and Health at Work
DT491 Environmental Health Places Available: 5	CASFX - Food Science CASLT - Laboratory Techniques	FIVE DISTINCTIONS FROM THE FOLLOWING C20006 - Biology C20011 - Chemistry D20022 - Food Chemistry C20139 - Mathematics C20041 - Microbiology C20024 - Food Processing C20140 - Nutrition C20048 - Physics B20029 - Statistics D20127 - Food Preservation & Processing D20001 - Anatomy and Physiology C20033 - Laboratory Techniques C20049 - Plant Science D20165 - Safety and Health at Work
DT501 Music Places available: 2	Any Award	FIVE DISTINCTIONS and AUDITION for minimum entry.
DT504 Film & Broadcasting Places available: 3	ONE OF THE FOLLOWING AWARDS: ETFPX - TV & Film Production EMPXX - Media Production ERPXX - Radio Production EMMPX - Multi-media Production EPJXX - Print Journalism EPAAX - Performing Arts Administration	FIVE DISTINCTIONS
DT506 Music (Commercial Modern) Places available: 8	Any Award	FIVE DISTINCTIONS and AUDITION for minimum entry.
DT529 Drama (Performance) Places Available: 2	Any Award	FIVE DISTINCTIONS and AUDITION for minimum entry.
DT532 Law Places available: 3	BLSXX - Legal Studies	FIVE DISTINCTIONS
DT533 Visual & Critical Studies Places available: 3	Any Award	FIVE DISTINCTIONS.
DT544 Design - Interior & Furniture Places Available: 5	Any Award	FIVE DISTINCTIONS and PORTFOLIO for minimum entry.
DT545 Design - Visual Communications Places Available: 5	Any Award	FIVE DISTINCTIONS and PORTFOLIO for minimum entry.
DT546 Fine Art Places Available: 5	Any Award	FIVE DISTINCTIONS and PORTFOLIO for minimum entry.
DT556 International Business & Languages (German) Places available: 2	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS
DT557 International Business & Languages (Spanish) Places available: 2	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS
DT558 International Business & Languages (English) Places available: 2	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS
DT559 Photography Places available: 5	Any Award	FIVE DISTINCTIONS and PORTFOLIO for minimum entry.
DT564 International Business & Languages (Italian) Places available: 2	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS
DT565 International Business & Languages (Chinese) Places available: 2	ONE OF THE FOLLOWING AWARDS: BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BMXXX - Marketing BBSXX - Business Studies	FIVE DISTINCTIONS
DT571 Social Care Places Available: 4	ONE OF THE FOLLOWING AWARDS: DCHSC - Childcare DCHSX - Community & Health Services DCHCC - Community Care DCHSN - Nursing Studies EASSX - Applied Social Studies	FIVE DISTINCTIONS
DT572 Early Childhood Education Places Available: 4	ONE OF THE FOLLOWING AWARDS: DCHSC - Childcare DCHSX - Community & Health Services DCHCC - Community Care DCHSN - Nursing Studies	FIVE DISTINCTIONS
DT582 Journalism Places available: 3	ONE OF THE FOLLOWING AWARDS: ETFPX - TV & Film Production EMPXX - Media Production ERPXX - Radio Production EPJXX - Print Journalism	FIVE DISTINCTIONS WHICH MUST INCLUDE: G20001 - Communications E20078 - Writing for Journalism E2008 - Media Analysis OR G20031 - Social Studies AND ANY TWO OF THE FOLLOWING: E20011 - Photography E20076 - Research Skills for Journalism E20077 - Technical Skills for Journalism E20137 - Radio Programme Production E20149 - TV & Video Production OR E20150 - Film Production
DT596 Print & Digital Media Technology Management Places Available: 5	Any Award	FIVE DISTINCTIONS
DT597 Creative Industries - Theory & Context Places Available: 3	Any Award	FIVE DISTINCTIONS

<< back to top>

Ordinary Degree Programmes

DIT PROGRAMME	LINKED TO ALL OF THE FOLLOWING FETAC AWARDS
DT000 Engineering (General Entry) Places Available: TBA	CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CMTXX - Motor Technology
DT002 Engineering Systems Maintenance Places Available: 7	CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CMTXX - Motor Technology
DT003 Automation Engineering Places Available: 7	CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CMTXX - Motor Technology
DT004 Civil Engineering Places Available: 7	CCONT - Construction Technology CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CMTXX - Motor Technology
DT005 Building Services Engineering Places Available: 7	CCONT - Construction Technology CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology
DT006 Mechanical Engineering Places Available: 7	CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CMTXX - Motor Technology
DT007 Automotive Management & Technology Places Available: 7	CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CMTXX - Motor Technology
DT008 Electronics & Communications Engineering Places Available: 7	CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology
DT009 Electrical & Control Systems Places Available: 7	CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology
DT010 Electrical Services Engineering Places Available: 7	CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology
DT011 Aviation Technology Places available: 7	CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CMTXX - Motor Technology
DT080 Networking Technologies Places available: 6	CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CCNMX - Computer Network & Maintenance
DT104 Auctioneering, Valuation & Estate Agency Places Available: 7	BBSXX - Business Studies BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration
DT169 Timber Product Technology Places available: 5	ADESX - Design ACADX - Computer Aided Design AFURX - Furniture Design CCONT - Construction Technology
DT212 Science - common first year Places Available: 5	CASFX - Applied Science - Food CASLT - Applied Science - Lab Techniques CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology
DT259 Biosciences Places Available: 5	CASFX - Applied Science - Food CASLT - Applied Science - Lab Techniques CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology
DT260 Industrial & Environmental Physics Places Available: 5	CASFX - Applied Science - Food CASLT - Applied Science - Lab Techniques CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology
DT261 Medicinal Chemistry & Pharmaceutical Sciences Places Available: 5	CASFX - Applied Science - Food CASLT - Applied Science - Lab Techniques CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology
DT406 Tourism Management Places Available: 7	Any Award
DT408 Hospitality Management Places Available: 7	Any Award
DT411 Leisure Management Places Available: 7	Any Award
DT418 Baking & Pastry Arts Management Places Available: 7	CASFX - Applied Science - Food DHCXX- Hotel & Catering
DT598 Visual Merchandising & Display Places available: 7	AAXXX - Art AACDX - Art/Craft/Design ACADX - Computer Aided Design ACXXX - Craft ADESX - Design AFDXX - Fashion Design AFURX - Furniture Design AGDXX - Graphic Design AIDXX - Interior Design BBSXX - Business Studies and PORTFOLIO for minimum entry

<< back to top>

Higher Certificate Programmes

DIT PROGRAMME	LINKED TO ALL OF THE FOLLOWING FETAC AWARDS
DT020 Preliminary Engineering Places available: 5	CCONT - Construction Technology CCTXX - Control Technology CELTX - Electronic Technology CENGT - Engineering Technology CITXX - Information Technology CMTXX - Motor Technology
DT170 Buildings Management (Maintenance & Conservation) Places available: 6	ADESX - Design AGDXX - Graphic Design ACADX - Computer Aided Design AFURX - Furniture Design AIDXX - Interior Design CCONT - Construction Technology
DT303 Marketing Places Available: 4	BBSXX - Business Studies BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BEBXX - e Business BMXXX - Marketing BRSXX - Retail Studies
DT315 Business Studies Places Available: 10	BBSXX - Business Studies BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BEBXX - e Business BMXXX - Marketing BRSXX - Retail Studies
DT324 Business Management Places Available: 8	BBSXX - Business Studies BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BEBXX - e- Business BMXXX - Marketing BRSXX - Retail Studies
DT360 Retail Management & Marketing Places Available: 4	BBSXX - Business Studies BBSSX - Business Studies - Secretarial BBSAX - Business Studies - Administration BBSIT - International Trade BEBXX - e- Business BMXXX - Marketing BRSXX - Retail Studies
DT424 Food Science & Management Places available: 5	BBSXX - Business Studies DCHSX - Community and Health Services DCHCC - Community Care DHSXX - Healthcare Support CASLT - Applied Science- Laboratory Techniques DCHSN- Nursing Studies
DT425 Pharmacy Technician Studies Places Available: 4	BBSXX - Business Studies DCHSX - Community and Health Services DCHCC - Community Care DHSXX - Healthcare Support CASLT - Applied Science- Laboratory Techniques DCHSN- Nursing Studies
DT432 Culinary Arts (Professional Culinary Practice) Places available: 8	Any Award
DT444 Health & Nutrition for Culinary Arts Places Available: 5	Any Award

<< back to top>